ITW Dynatec DynaFlex Heated Hoses

heated hoseThe DynaFlex hose is the standard ITW Dynatec heated hose for use with hot melt adhesive systems

The DynaFlex comes in a variety of lengths to suit your particular installation. Further variations are available including an abrasion resistant hose for use in environments requiring additional protection from mechanical damage. The ITW range also includes swirl hoses which are typically used in conjunction with a swirl handgun to produce an open spray pattern.

We also stock a full range of adaptors, supporting straps and fittings for use with heated hoses.

Click link below for further details on the ITW Dynatec range of heated hoses.

Product Brochure

Standard ITW Dynatec Heated Hoses

Dynatec Part NumberHose Description
102137DynaFlex, 0.6M / 2ft, Bead
101083DynaFlex, 1.2M / 4ft, Bead
101084DynaFlex, 1.8M / 6ft, Bead
101085DynaFlex, 2.4M / 8ft, Bead
101086DynaFlex, 3.0M / 10ft, Bead
101087DynaFlex, 3.6M / 12ft, Bead
101088DynaFlex, 4.9M / 16ft, Bead
102138DynaFlex, 6.1M / 20ft, Bead
101089DynaFlex, 7.3M / 24ft, Bead
105187DynaFlex, 9.2M / 30ft, Bead
106216DynaFlex, 11.1M / 36.5ft, Bead
105601DynaFlex, 12.3M / 40ft, Bead
809557DynaFlex, 13.7M / 45ft, Bead
807300DynaFlex, 15.2M / 50ft, Bead

Please contact us if your part number is not listed. This is just a small selection of the most common heated hoses.

Custom Heated Hoses

Custom hoses are available on request. We are able to provide a heated hose suited to your exact application.

We can manufacture a hose to your individual specification – it is possible for us to accommodate different internal bores, sensor and connector types. Universal Adhesives Systems Ltd offer extremely competitive replacement heated hoses for all leading hot melt adhesive manufacturers.