ITW Dynatec, an ISO 9001-certified manufacturer, has been an industry leader in adhesive application technologies for over 40 years.
Universal Adhesive Systems is the EXCLUSIVE UK distributor
ITW Dynatec designs, manufacturers and sells a full range of cold and hot-melt glue application equipment for the Nonwovens, Converting, Product Assembly and Packaging industries worldwide.
Hot Melt Adhesive Supply Units (ASU)
When it comes to hot melt glue supply units ITW Dynatec leads the industry. We manufacture a complete line of innovative adhesive supply units for low, medium and high-speed packaging operations. No matter what you need, Dynatec has the right hot melt glue machine to fit your needs.
Hot Melt Glue Feeders
Hot melt adhesive feeders automatically transfers hot melt adhesive from a bulk container to the adhesive supply unit increasing productivity and reducing equipment down time by keeping the adhesive supply unit full of hot melt glue.
Hot Melt Glue Drum Unloaders
Hot Melt Adhesvie Drum Unloaders provide an uninterrupted flow of hot melt adhesive for high volume production lines. Drum unloaders allow a full drum to be staged and used as needed.
GEMINI Redundant Circuit Hot Melt Hoses
Hot melt adhesive supply hoses are electrically-heated, flexible conduits designed for the transfer of hot-melt material from an adhesive supply unit (ASU) to an applicator (head or handgun). Gemini hoses are equipped with an extra heater and RTD sensor and a switch assembly which allows the operator to switch the hose's operation between the two providing a back up system. This hot melt hose works with a wide variety of hot melt machines
Hot Melt Adhesive Automatic Applicators
Hot Melt Adhesive Applicators are air-operated or pump operated hot melt adhesive applicator assemblies.
Hot Melt Adhesive Hand Gun Applicators
ITW Dynatec's Manual Adhesive Applicators are hand-held hot melt adhesive applicators which dispense hot melt adhesive onto a substrate via manual activation of a trigger. The DGII applicators are electrically heated independent of the adhesive supply hose. Temperatures are controlled by the controller at the adhesive supply unit.
Hot Melt Adhesive Pattern Controllers
The Hot Melt Ahdesive Pattern Controller is one component of an adhesive application system consisting of a hot-melt unit, cold glue pressure vessel or cold glue pump, adhesive hoses and applicator heads. The controller can be used for hot melt or cold glue application. The pattern controller activates solenoids for the applicator heads in order to create individual adhesive patterns.
Cold Glue Applicator Systems and Glue Application Machines
Pre-Assembled 1:1 Diaphragm Pump/Filter/Fluid Regulator
2:1 Fluid Delivery System
Built-In By-Pass
Fluid Pressure Regulation via Air Pilot
Stainless Steel and Inert Plastics Wetted Parts
Email: sales@universal-adhesives.co.uk