ITW Dynatec, an ISO 9001-certified manufacturer, has been an industry leader in adhesive application technologies for over 40 years.
Universal Adhesive Systems is the EXCLUSIVE UK distributor
Dynamelt™ APS - PUR Adhesive Supply Unit
The Dynamelt Automatic Purge System (APS) hot melt adhesive application system is designed to be used with polyurethane (PUR) adhesives. The APS' sealed lid and moisture removal system ensure successful PUR application.
The Dynamelt APS features ITW Dynatec's patented no-char Melt-On-Demand™ system.
DYNAMELT APS™ The Dynamelt Automatic Purge System (APS) hot melt adhesive application system is designed to be used with polyurethane (PUR) adhesives. The APS' sealed lid and moisture removal system ensure successful PUR application.
• MELT-ON-DEMAND hopper grid extends adhesive life and performance
• Automatic adhesive hopper air purge system
• PUR adhesive level sensor with low level alarm
• DynaControl™ automatic purge software with alarms
• 7 year MELT-ON-DEMAND hopper warranty
Technical Spec:
Hopper Capacity: 22kg (48lbs)
Operating Temperature: 10 to 218°C (50 to 425°F)
Melt Rate (per hour): 23 kg/hr (50 lb/hr)
Melt Rate (per hour) - w/ Optional Grid
41 kg/hr (90 lb/hr)
Pump Rate (4.5cc Gear).38 kg (.83lb) min
Gear Pumps Standard: 1.5 cc/rev or 4.5 cc/rev
Hose Output Zones: 2,4
Temperature Control Stability: ± 1°C (1°F)
Electrical Service Standard:
240 VAC 1Phase 50/60 Hz
Electrical Service Standard:
240 to 380 VAC 3Phase 50/60 Hz
I/O Capability Standard: x Output, X Input
Working Viscosity: 500 to 50,000 cps
Email: sales@universal-adhesives.co.uk