Cold Glue

High performance cold glue application systems

Cold glue systems involve water based adhesives which are liquid at room temperature. Cold glues are pressurised in vessels and supplied to application heads via non-heated hoses. Heads and pumps can be controlled using our range of pattern controllers. Use of a controller such as our DY2008 will provide gear-to-line control of the delivery pump for accurate coatweights at variable line speeds. ITW Dynatec pattern controllers will also enable the user to achieve precise glue lines adjustable in millimetre increments. Cold glues are typically applied via non-contact spray or jet or alternatively by a contact nozzle or die.

Our cold glue systems are used in a variety of industries. They are particularly common in high speed envelope manufacture and can be found fitted to many Winkler and Dunnebier machines.

We sell and support the complete range of ITW Dynatec cold glue systems. We are able to service/repair your equipment on-site or at our repair facility. We also stock a range of cold glue spares here in the UK.

Cold Glue Pumps

Ultra reliable delivery pumps for water based/cold glues Our cold glue delivery systems fall into one of two categories: Low Pressure = pressure tank (max pressure 110 PSI / 7.5 bar) Basic pressure tanks use compressed air to deliver adhesive to the applicator. The adhesive line pressure is equal to the air pressure supplied to...

Read more ...

Cold Glue Application Heads

In addition to an extensive hot melt adhesive range of equipment ITW Dynatec also design and manufacture cold glue application equipment.  Cold glue application heads fall into two categories; electronic and pneumatic.  For either type of application head the key to designing successful components has been a an obsessive eye on precision and efficiency.  For example;...

Read more ...

Cold Glue Hoses & Spares

High quality parts, rapid delivery, low cost We stock a range of flexible hoses to transfer your cold glue material from the pump to the point of application. High Pressure Hoses – screw fit (variable lengths) For connection between the high pressure pump and application head(s). It is possible to supply hoses in custom lengths to...

Read more ...